Write on steel, glass, wood, plastics, plaster, rocks or marble. Write even on hardened steel! The WEN Engraving Pen enables you to write on these materials just as efficiently as when writing with an ordinary pen on paper.

The extremely durable tungsten carbide stylus needles were during the development phase exposed to a 150 hour test, continuously writing on mild-steel. No impact on the needles could be observed.

WEN Engraving Pen is compressed air powered and works with extremely low vibrations at a frequency 2 to 3 times higher than that of competing pens. The result is a sharp and deep continuous mark, in text or illustrations.

The pen can be equipped with three alternative oscillating stylus needles; fine, medium or coarse. It can also be equipped with an oscillating knife (e.g. for carving in wood) or an oscillating chisel (e.g. for preparation of small rocks). The stylus needles are made from tungsten carbide in order to reach a long service life.

The WEN Engraving Pen is often used for component identification or batch identification in machine shops. It is also handy when marking tools, motorcycles, cars etc for identification or for anti-theft protection.

One daily drop of oil in the air supply line is all maintenance that is required.

The WEN Engraving Pen is as standard supplied with a medium stylus needle installed and a 2,5 metre reinforced industrial type hose. The WEN Engraving Pen is CE-certified.

Download detailed information as PDF | Download spare parts list as PDF